Want Ads

FOR SALE AND WANTED ADS
PLACE YOUR ADS HERE FREE!!!

Send us your wanted items, items for sale or services offered.
Be sure to include exactly what you are offering or seeking
and your contact information as you would like to see it appear.

To place an ad on Sneaky Pete's Want Ad page,
call Cy or Carol Schmitz: 651-437-8291 or send snail-mail:
14050 Courthouse Boulevard, Rosemount, MN 55068.
or e-mail: sneakypete@sneakypetespullers.com

ATTENTION ADVERTISERS
In order to keep this page somewhat current,
I will remove any advertisements 6 months or older
WITHOUT NOTICE
if the advertiser doesn't notify us to extend the date.

So please be sure to let us know
if you want to change or update your information in your ad
and we will either remove, edit or update it.
Please send any errors or omissions of any ads directly to
sneakypete@sneakypetespullers.com
Thank you!

IMPORTANT NOTICE
It has come to our attention that certain con/scam artists,
especially from Europe, South Africa and Nigeria,
have been collecting e-mails from the advertisers (you) in websites like ours.
If you receive an e-mail about someone wanting something from you
and they don't specify what the item is,
PLEASE USE EXTREME CAUTION!!!
They may end up sending you a worthless cashier's check or money order.
They may also ask for personal information, such as banking or credit card information, that will be used against you.
DO NOT RESPOND TO THEM!!!

Remember, if it doesn't read quite right,
if you have doubts about any particular e-mail message
or if the e-mailer won't call you on the phone about your item,
then chances are it's a scam to get your money and/or your item for free!
Don't hesitate to report any questionable e-mails to the proper authorities!
Forward their original e-mail to Internet Fraud Complaint Center.
Always ask people to call you on the phone concerning your items for sale.
If you don't hear from them or they call and a legitimate name and phone number doesn't appear on your caller I.D.,
then chances are they're out to rip you off .

Date This Page Last Updated: 12/31/2011

FOR SALE LISTINGS

PLACE YOUR WANT AD HERE FREE!!!

FOR SALE:

CUBS, CUBS and MORE CUBS

SNEAKY PETE aka Cy Schmitz
has just about anything you would need to get started building a tractor
and if he doesn't have it, he will help you find it.
Check with Cy first if you are new to building or to garden tractor pulling.
Be sure to check current rules for your tractor class
as the rules do change from year to year.
Build or buy your first tractor with guidance from Cy
and you won't be disappointed.

Cy's (aka Sneaky Pete's) inventory includes:
MANY Cub Cadet tractors and parts, Kohler motors, motorcycle parts,
Complete 750 CC HONDA MOTORCYCLE (No Title),
complete tractors ready to pull,
rolling chassis, and many items too numerous to mention.
Call or Email him for more details.
Call 651-437-8291 or
email sneakypete@sneakypetespullers.com

Updated January 2012

FOR SALE:

Full size level 7 style sled - Has been inspected for 2011 - Reduced to $115 or OBO
Possible will take part trade - Wanted motorized mini sled.
Photos available upon request. Fredericksburg, VA
Email storckroad691@aol.com Or call 540-840-8992
Updated 12-31-11

FOR SALE:
Mini rod with a Honda cb 750 engine and stock motor as far as I know. Light frame with me on it - weighs under 1000 lbs.
Aluminum rims with bar tires 26x12x12, aluminum front rims, set of turf tires. Ran in July been sitting since.
Needs carb cleaned, it won't start from sitting - Also the steering cable broke in July. it runs the motorcycle clutch.
It runs from there to a shaft back to a gear chain driving to the rear axle. Adjustable hitch, wheelie pads, new battery and fuel pump in June ran it off 110 mixed with 91 asking $1,100 OBO Any offer considered. Photos available upon request. Jackson, MN
Have a new project in the shopmonkeyman2006@hotmail.com or call 507-227-9460 for more info.
Posted 12-23-11

FOR SALE:
Our 1750 lb mini rod: College Fund, 2 sets of tires 358ci small block Chevy. 3 disc crower 8" slipper clutch, Timmerman gearbox. Dana 60 rear with Dana 70 4 pinion carrier, Mark Williams axles, Billit bearing holders, Willwood brakes, Wysong frame, Wysong wheels on rear, Berg cut 31" cepeks and 29.5" slicks. 14.5 to 1 comp. engine. All the good stuff! 2011 Sneaky Petes Pullers and Gopher State Garden Tractor Pullers Point Champ.  One of the strongest small tire mini rods in the state! Full cage with harness,
no money spared when built.   If you have the guts to put the hammer down on this tractor, you can win where ever you want to!  Selling because another build in process.  Professionally built and maintained by John Anderson in Cottage Grove, Mn.
Sacrifice price of $9,000   Email anderjm@msn.com or phone 651-238-7654. NO SCAMMERS PLEASE!!!
Posted 11-3-11

FOR SALE:
Magnuson Machine Built 4x4 with Ti valves and Lakota Head with a #633/ 546 lift cam. Aluminum oil pan, Lakota Rod,
JE Piston, 125 pop out, and a 20lb flywheel. Chevy front points. Best of parts. Engine is a strong runner. asking $5,000 OBO
Call Magnuson Machine at 612-859-8363 for more info.
Updated 11-3-11

FOR SALE:
Agent Orange: Air research/Garrett Turbine Engine alcohol injection. Richmond Gear 2 speed transmission.
Approx. 300 hp. 9" ford rear end with 7:33 gear ratio. Lawntec rear tires. Won 18 out of 20 pulls.
Runs in the 1500 lb. Mini Rod Class. $10,000. Call Dave At 979 732-0854

Red Witch: Based on a 682 Cub Cadet. 65 hp Wisconsin Engine. Runs on Racing Gas/ methanol 50:50 mixture.
Twin disc ceramic clutch. Midwest super carb rear end billet carrier. Big axle kit. $2,000 call Dave at 979 732-0854
Posted 10-5-11

FOR SALE:

CONTACT: 765-585-5776,,,, IF NO ANSWER LEAVE MESSAGE or E-MAIL fwmiller61@gmail.com
NO LONGER IN THIS SPORT, SELLING ALL TRACTORS AND ACCESSORIES!
PHOTOS AVAILABLE UPON REQUEST - Location: VEEDERSBURG, IN

NQS 30 CI PULLING TRACTOR - READY TO PULL!!!
Complete tractor and weights, 44 mm carb. on Woolum Block Engine (built by J. W. Performance)
known as the,, "PAPA BEAR" $4,000 OR OBO. Will also consider trade for certain items.

NQS 30 CI PULLING TRACTOR - READY TO PULL!!!
Complete tractor and weights, 52 mm carb. on Woolum Block Engine (built by J. W. Performance)
fresh updated engine,,,, " The UNDERTAKER"$5,000 OR OBO. Will also consider trade for certain items.

NQS 30 CI PULLING TRACTOR - READY TO PULL!!!
Complete tractor and weights, 44 mm carb. on Woolum Block Engine(built by J. W. Performance)
known as the "SILVER BULLET" $2,500 OR OBO. Will also consider trade for certain items.

KOHLER 30 CI COMPLETE ENGINE & FLYWHEEL W/STARTER RING
44 MM CARB (Built by J. W. Performance) needs freshened $1000 or OBO. Will also consider trade for certain items.
DICK CEPEKS (FRESH CUT) on 6 X 6 Aluminium Rims $450 OR OBO.
Posted 8-10-11

FOR SALE:
Older cub Dodge carrier kohler 16 fully built app 70 hp nice paint ready to go with weights and remote starter 2850.
Also Cub with v twin stock rear end app 35 hp painted green 2650. Call Dan at 402 990 4967 (Nebraska)
or email danrailsback@yahoo.com for more info and pics.
Posted 8-3-11

FOR SALE:

Photos on website: www.cpinternet.com/~mstang Pick-Up Only in Champlin, MN
Mike-Phone-763-427-6887-H or 763-442-3058-C Email mstange@artsmia.org or mstang@cpinternet.com

$400 Kohler Magnum Series M301 - 12 hp wide base engine - electric and recoil start,
           low hours, like new, horizontal shaft
$500 Reduced 7 ft x 7 ft 3000 lb black Flat Bed Trailer with 3/4 inch treated plywood deck,
           3,500 lb axle and springs, Bearing Buddies, tires like new with spare, 1 7/8” coupler on
           tongue with jack, protected rear lights, tie downs, nice shape, lifetime registration.
$25-$100 Pulling power pipes, galvanized tubing or stainless steel, flange or threaded,
           standard design or built to specs.
$50 a Pair or $75 For All Four - 4-23 X 9.50 X 12 Sears Carlisle Rear Garden Tractor Tires
          on Wheels, Nice Shape & Hold Air.
$100 Reduced Cub Cadet 147 frame, nice shape, good paint
          (has factory modification to allow a ring gear starter engine installation)
$20   Antique stamped steel farm tractor seats, Farmall, John Deere, International, Case, Etc.
Updated 7-21-11

FOR SALE:
750/900 stock class pulling tractor, Wheelhorse chassis, weight brackets, nice red and white paint scheme with flames,
named Wild Fire. Aluminum. Wheels front and rear, 26x12x12 Carlisles on rear and 6x3.50 tri ribs on front.
Anderson Performance built 10hp Kohler engine, all the best put in it. Turn key tractor, ready to pull today. $1,500 or make offer. Photos available. Mike 763-427-6887 or email mstang@cpinternet.com for more info.
Updated 7-21-11

FOR SALE:

Turn Key Pulling Tractor With A 650 Kawasaki motor Cycle Engine With 3 sets of 26x12x12 Tar Tires and 1 Set of Dirt Tires,
Pulls in 950 -1100 Lb Class - Photos Available,$2,750 Call Mark 612-310-2795 Or Email Markoverman@Embarqmail.com
Posted 6-27-11

FOR SALE:
Have a Cub Cadet 1250 for parts. 12hp engine, 50 inch IH mower deck.
Also have a 1450 complete tractor with hydraulic deck lift and 54 in deck. Doesn't run but engine was rebuilt... can't get spark.. Located in Fredericksburg PA . Can send photos upon request.
Email amd9992@hawkmail.hacc.edu or call or text Adam at 717-222-6647.
Posted 5-11-11

FOR SALE:
JD 70 garden tractor completely original with official JD hub caps, excellent paint condition and have original deck
that has never been patched or welded. great shape. Mower runs, and mows, Pics upon request. Asking $450 obo
Please call if interested 402-427-4559
Posted 5-11-11

FOR SALE:

1. 50.5 Nichols super stock engine, completely updated June 2010 and about 12 runs since.
     New Head, piston, rod, cam, lifters, springs, and retainers. Has 52mm carb, 3 stage exhaust pipe,
     14lb steel flywheel with ring gear. Ready to bolt in, complete from carb to oil pan.
2. 30CI engine, Kolher block, new ceramic coated piston, Finished 2nd at Sturgis KT NQS pull,
     complete from starter to 52mm carb.
3. 576-296-540-296 vogel steel cam, with lifters, springs, and retainers, butterfly cut, $300 for all
4. 4.125 arias ceremic coated piston, only run about 20 passes, excellent condition. $175
5. 6.000 vogel rod $75
6. Holley black electric fuel pump and regulator. $100
7. 2 K&N air filters, 4" flange, fits 52mm carb.   $25 each

Prices are shipping included, will even ship engines.
Call Wes Kampeter for more info 573-680-7702 or email weskampeter@hotmail.com
Posted 2-28-11

FOR SALE:

New rolling mini rod chassis, fully adjustable rear end set-up. will accept Ford, Dana, Chevy, Toyota.
Will also accommodate straight axle set-up for motor cycle power. Rack and pinion steering w/spindles.

We also have a Basic chassis kit starting at $699 for more information
please visit www.cubshop.net or contact us at cubshop@windstream.net or call 330-527-4101 ask for Doug
Updated 2-22-11

FOR SALE:

Wisconsin VF4D 4-cylinder engine. Air cooled, cranks over, has gear box and is in great shape. Asking $2,000 OBO.
Located in Somerset, WI. Buyer must arrange and pay for shipping or picking up. Contact Helen at 715-781-7055 or e-mail at: flyhi@frontiernet.net - Also have an old Jacobson lawn mower, must have been sitting in the barn for 20 years. Photos available.
Updated 2-21-11

FOR SALE: Willing to deal!!

4cyl. mini rod with a ford 2000 cc motor, narrowed 9 inch Ford rear end, 4 speed manual trans., 31x15 cepak pulling tires,
on 15x15inch on 5 spoke alum. rims. Also have a spear motor and a set of Goodyear 31x15 tires on alum.wheels and weights.
Would like to sell the whole lot, but willing to (deal) on parts. Located in So Dakota Call 1-605-670-8798
or email bblampie@dishmail.net
Updated 2-21-11

FOR SALE:

30 Cube Cub 100 built three years ago and fits all NQS 30 Cube rules. It only has four runs since a fresh rebuild.
Has a Jones block with a super cub crank, support bearings on both ends with an SS Super D carb.
It has a three puck super cub clutch, four speed transmission dodge dart carrier and axles w/ stock ring gear.
Dick cepek tires. Asking $5,200 or Best Offer Can be contacted anytime c_yoquelet@yahoo.com or (260) 437-1459
Updated 2-21-11

FOR SALE:

13 fin 16hp new sleeve with standard bore and valve seats ground $150
12 fin 16hp bore is now .007 over stock (needs machined) $100
14 hp bore is .005 over stock (needs machined) $50

Photos Available - Call Mike at 817-427-3711 or Email: mmbyers@yahoo.com
Updated 2-21-11

FOR SALE:
1979 case 446 hydro tractor made into pulling tractor in stock or stock altered class. Completely taken apart
and painted JD colors. Stainless steel dash, hood sides, grill top, louvers in top of hood. Welded spiders in rear.
k301 Kohler overhauled, carb spacer and velocity stack, vertical exhaust stack, hydro cooler with Atwood electric fan,
alum foot throttle, adjustable hitch, alum wheelie bars with wheels, rear kill switch for hooking to sled, push button start,
digital tach, all new hydro hoses, fuse panel. Most parts brought from Midwest Super Cub. Carlisle 26x12-12 rears with
extra rims. Carlisle 13x6.50-6 fronts. extendable weights on front. weight bracket in front of rear wheels.
240 lb of weights included. Has never pulled and do not have time to. Need to sell - Make me a offer.
Photos available. Contact kersh7164@ruraltel.net or 785- 639-7771. Hays, Kansas.
Posted 2-20-11

FOR SALE:

Cub Cadet 1200 w/Suzuki gsxr 600 motor w/lawn tec 26x12x12 on alum wheels - 3 ribbed tires up front on alum wheels,
all bellet gears n harden axles in the Cub rear and weights - Located in Grantsville, MD - Asking $3000 obo
Call Jason at 301-616-4140 or email weeman407@hotmail.com for more info.
Posted 10-25-10

FOR SALE:

50.5 cube For sale, MVP Stahl built Pro-Stock - very few hooks since built.- Makes THUNDER HP!
Complete ready to run, less clutch and driver. "Very-Sharp!" Pix available, Religious oil changes as well!
If interested call Kevin @ 608-381-5051 or email aj.moll@yahoo.com Thanks For Looking!
Posted 8-7-10

FOR SALE:

Everything you need to make it run - would make a very strong pulling motor

07 Hayabusa engine kit - Asking $3,500 cash mikeshelton@bbwi.net or Call 816 646 9196

Posted 2-16-10

FOR SALE:

Kohler 60.over sport stock aluminum starter pulley Midwest and Vogel internals, Vogel recast 1.200 carb.
Freshened winter 08' very nice!!! Went to Pro stock.- Photos Available $1500 A J (608-448-9356) thanks!
abeandmabel@centurytel.net
Updated 2-3-10

FOR SALE:

!) Late 90s Simplicity, no engine, but body parts all good, no rust. Could be nice puller.
2) Early cast iron tube framed Bolens G-10 that is in good condition.
Comes with tire chains, plow, snow blower, but engine needs work and trans needs reverse gear.
3) Early Simplicity, cast iron frame, all body parts, good trans, no engine. Nice shape.
4) Light estate tractor, no engine, good trans, red/black. Could make a good race tractor.
For more info Email me at hardyhar@mwt.net or call at 1 608 385 7691
Posted 9-6-09

WANTED LISTINGS

PLACE YOUR WANTED AD HERE FREE!!!

WANTED:

Kohler k330 and/or k331 engines. Email Duane at dbvanheuk@gmail.com or call 612-251-7060 anytime.
Updated 2-22-11

WANTED:

Wanted to Buy - Motorized mini sled.-
For Sale or Trade: Full size level 7 style sled (asking $140) Inspected for 2011.
Photos available upon request. Fredericksburg, VA
Email storckroad691@aol.com Or call 540-840-8992
Updated 2-21-11

WANTED:

2 stage snow blower for a 1810 cub cadet - Also parts to convert to hyd. system of moving deck, blade, maybe rear 3 point ( lift)
Email me at balsaman@optonline.net
Updated 2-21-11

WANTED:

Wanted early to mid 70's ford LGT garden tractor
joyfaust@comcast.net or call Paul 651-642-0057
Updated 2-21-11

WANTED:

Looking for red Cub Cadets - Both series 582 and 682. Call Sid at work 920-294-6520 until 4 PM. Green Bay, Wi area.
Updated 2-21-11

WANTED:

I need a set of 9 OR 10 inch wheels for my BOLENS. i saw a set on a 15#$ cub cadet.
It had the 5 lug with about 2.5 - 3 inch backspacing. I'm using a 12" wide tire. 12 inch rim size.
Do you have any 12 inch rims, 10 inch wide. 4.5" on 5 lug wheels??? I don't think I can use the 4 inch backspace wheels .
Please call Kevin in Missouri - 636-359-5677 or email kevin.stot@yahoo.com

Posted 10-21-09

WANTED:

Used 2 stage snow blower to fit a Bolens 1600, with attachments. Call Mel at 519-584-7632
gwen2@rogers.com
Updated 9-7-09

Back to Home Page